Menu
We supply ceiling plates in a number of finishes and to suit a large variety of ceiling constructions.
Please pay careful attention to the maximum load weights in the product descriptions. All ceiling plates include coloured screws and are supplied without drill holes unless otherwise requested. Please note prices are subject to VAT.
A selection of the ceiling plates that we supply can be purchased directly through our shop here.
All our plates are designed to be drilled and screwed into a joist or noggin so that they sit flush on the ceiling and electrical flex can be passed through the central hole.
Supplied undrilled but can be drilled with two or more holes and matching screws upon request.
As photographed left to right. Please note all prices are plus VAT.
Max weight load 60kg
Diameter 7cm
Hook clearance 8mm
From £70 each
Max weight load 60kg
Diameter 11cm
Hook clearance 9mm
From £90 each
Max weight load 60kg
Diameter 9.7cm
Hook clearance 11mm
From £80 each
Max weight load 80kg
Diameter 12.7cm at widest point
Hook clearance 7mm
From £125 each
Solid cast brass ceiling plates with hooks/loops suitable for holding weights of up to 150kg. Plate and hook/loop are made of brass and ‘T’ bar fixing made of steel with 2 holes and supplied with steel screws. Central hole in hook/loop to electrical flex through. All pictured in polished brass, can be plated in a variety of finishes.
Plain Plate
Diameter 14.8cm
Hook clearance 11mm
Max weight load 150kg
From £125
Small Decorative
Diameter 16.1mm
Loop clearance 19mm
Max weight load 150kg
From £200
Large Decorative
Diameter 19.9mm
Loop clearance 21mm
Max weight load 150kg
From £250
Small Fluted Cone
Brass ceiling cone, ideal for covering unattractive electrical connections or hooks. Supplied with either large plain or ornate shackle as seen in image. Cone locks into position with locking screw on collar. Pictured in polished brass can be plated in a number of finishes.
Max weight load 100kg for either shackle
Diameter 11.2cm
Depth (excluding tube & bottom loop) 5.7cm
From £40 each
Large Fluted Cone
Brass ceiling cone, ideal for covering unattractive electrical connections or hooks. Supplied with either large plain or ornate shackle as seen in image. Cone locks into position with locking screw on collar. Pictured in polished brass can be plated in a number of finishes.
Max weight load 100kg for either shackle
Diameter 15.7cm
Depth (excluding tube & bottom loop) 7cm
From £45 each
Small Plain Cone
Brass ceiling cones, ideal for covering unattractive electrical connections or hooks. Supplied with small plain shackle. Cone locks into position with locking screw on collar. Pictured in polished brass can be plated in a number of finishes.
Max weight load 60kg
Diameter 11.5cm
Depth (excluding tube & bottom loop) 5cm
From £35 each
Large Plain Cone
Max weight load 100kg
Diameter 19cm
Depth (excluding tube & bottom loop) 6.5cm
From £45 each
Small Ribbed Cone
Brass ceiling cone, ideal for covering unattractive electrical connections or hooks. Supplied with small plain shackle. Cone locks into position with locking screw on collar. Pictured in polished brass can be plated in a number of finishes.
Max weight load 60kg
Diameter 9.7cm
Depth (excluding tube & bottom loop) 5.4cm
From £35 each
Large Ribbed Cone
Brass ceiling cone, ideal for covering unattractive electrical connections or hooks. Supplied with large plain shackle. Cone locks into position with locking screw on collar. Pictured in polished brass can be plated in a number of finishes.
Max weight load 100kg
Diameter 13.6cm
Depth (excluding tube & bottom loop) 7.5cm
From £40 each
Supplied is a steel hook (drilled to M10 or M12) with grub screw, spinning plate and collar with locking screw. Electrical cable passes through hole in spinning plate due to solid hook. Collar and plate are made of brass and hook made of steel. Pictured in polished brass, can be plated in a variety of finishes.
Available in small, medium, large and extra large sizing. (Please visit the online shop for measurements.)
Prices from £80
These spinning plates to be used on ceilings where M10 or M12 steel studding has been securely fitted. Studding can be supplied on request.
Registered Company Number: 02670892
© 2024 Wilkinson Ltd. All Rights Reserved.
We’ll never spam or share your data with a third-party.
Please note that our office will be closed from 2:30PM on Tuesday 18th June until 9:00AM on Wednesday 19th June.