Shop
-
Brass Wall Lights with 2 Flambeau Shades
2 branch ribbon and flame brass wall lights with flambeau shades and decorative castings.
Each glass shade contains an internal lamp holder.
Projection 23cm.Price listed is for the pair.
Reference: CS 1818Dimensions (cm): H:50 x W:48Read more -
12 Light Mid Victorian Chandelier
Recently restored 12 light, mid Victorian period chandelier with rope twist arms and crooks and traditional double pointed button dressings with pear pendants. In the manner of F & C Osler, but no makers mark found.
Reference: CS 1900Dimensions (cm): H:125 x W:80Read more -
Small Antique Victorian Chandelier
A four light antique crystal chandelier recently restored with some replacements.
Reference: CS 1707Dimensions (cm): H:80 x W:65Read more -
Small ceiling plate – Polished brass
£84.00 exc. VAT Add to basketOur plates are designed to be drilled and screwed into a joist or noggin so that they sit flush on the ceiling and electrical flex can be passed through the central hole.
Supplied undrilled but can be drilled with two or more holes and matching screws as pictured upon request.
Max weight load 60kg
Diameter 7cm
Hook clearance 8mmSupplied in a polished but unlacquered finish that will naturally age over time.
-
Small plain cone – Polished brass
£42.00 exc. VAT Add to basketBrass ceiling cones, ideal for hanging chandeliers and lighting and covering unattractive electrical connections or hooks. Supplied with small plain shackle. Cone locks into position with locking screw on collar.
Max weight load 60kg
Diameter 11.5cm
Depth (excluding tube & bottom loop) 5cmSupplied in a polished but unlacquered finish that will naturally age over time.
-
Satin Nickel 3 Branch Wall Light
A single 3 branch reproduction wall light in a satin nickel finish.
Measurements are without candles.
44cm Height 28cm Diameter 14cm Depth
Reference: CS 1986£300.00 exc. VAT Add to basket -
Small lightweight ceiling plate – polished brass
A small polished brass ceiling plate that is designed to hang chandeliers that weight up to 5kg. Each plate is held together by a hook with 1/2” allthread and nut, the hook is secured tightly by the nut locking onto the thread and plate. Electrical flex is able to pass through the allthread and the centre of the hook (diameter 8mm) to enable you to conceal connections above the plate.
Diameter of plate is 6.5cm / 2.5”
Diameter of screw holes 4.5mmReference: CP1£4.95 exc. VAT Add to basket -
Ceiling Plates
Enquire about this itemAll our plates are designed to be drilled and screwed into a joist or noggin so that they sit flush on the ceiling and electrical flex can be passed through the central hole.
Supplied undrilled but can be drilled with two or more holes and matching screws upon request.
As photographed left to right. Please note all prices are plus VAT.
Small Ceiling Plate
Max weight load 60kg
Diameter 7cm
Hook clearance 8mm
From £70 eachLarge Ceiling Plate
Max weight load 60kg
Diameter 11cm
Hook clearance 9mm
From £90 eachSmall Decorative Plate
Max weight load 60kg
Diameter 9.7cm
Hook clearance 11mm
From £80 eachOrnate Plate
Max weight load 80kg
Diameter 12.7cm at widest point
Hook clearance 7mm
From £125 eachPurchase Online
-
Heavy Duty Ceiling Plates
Enquire about this itemSolid cast brass ceiling plates with hooks/loops suitable for holding weights of up to 150kg. Plate and hook/loop are made of brass and ‘T’ bar fixing made of steel with 2 holes and supplied with steel screws. Central hole in hook/loop to electrical flex through. All pictured in polished brass, can be plated in a variety of finishes.
Plain Plate
Diameter 14.8cm
Hook clearance 11mm
Max weight load 150kg
From £125
Medium Leaf Cone
Diameter 16.1cm
Loop clearance 19mm
Max weight load 150kg
From £200
Large Leaf Cone
Diameter 19.9cm
Loop clearance 21mm
Max weight load 150kg
From £250
Purchase Online
-
French Candles E10
Enquire about this itemTapered nylon French style candles produced in England. Ideal for wiring chandeliers and wall scones.
Supplied with
- 1.5m length of two core clear electrical flex, either single or double insulated
- 10mm x 1mm female threaded bush for the base – so the candles can be cut down to desired height and used with bush to attach to fitting
Sold in component parts, tool required to insert lamp holders in to candle, supplied upon request.
Available in:
Cream – 6″ and 9″
White – 6″, 9″ and 11″These are heights above the 2cm rebate at base of candle.
Pictured left to right – 6″ cream, 6″ white, 9″ cream, 9″ white, 11″ white
-
French Candles E14
Enquire about this itemTapered nylon French style candles produced in England. Ideal for wiring chandeliers and wall scones.
Supplied with
- 1.5m length of two core clear electrical flex, either single or double insulated
- 10mm x 1mm female threaded bush for the base – so the candles can be cut down to desired height and used with bush to attach to fitting
Sold in component parts, tool required to insert lamp holders in to candle, supplied upon request.
Available in:
Cream – 11″
White – 11″These are heights above the 2cm rebate at base of candle.
Pictured left to right – 11″ cream, 11″ white
-
Wireless Candles with Battery Pack
Enquire about this itemAchieving a full charge can take upto 8 hours. The LED display panel will inform you of battery capacity for each individual candle as well as volt, current and internal resistance.
The 4 gang battery pack allows 4 batteries to be charged simultaneously
