Menu
Menu
Lanterns have been a popular method of lighting for centuries. The earliest examples were “glazed” with thin sheets of horn to protect the candle from draughts and wind, in England they were known as “lanthornes”. The hanging lantern as we know it today gained popularity in the 18th century, when they were glazed with glass and became more ornate whilst retaining their practical advantages over light fittings with exposed candles.
Showing 1–12 of 21 results
Solid brass and glass lantern with 10 internal lights on 2 tiers. Finished in polished brass with clear lacquer.
Dimensions: Height 160cm – Width 75cm
A hexagonal wall mounted lantern is solid cast brass. Metalwork is polished brass with a clear lacquer. Wired with a single pendant bulb and can be used externally or internally.
Dimensions: Height 73cm – Width 45cm
Our Windsor style lanterns are a popular design due to their traditional form typical of the late 18th, early 19th century. This solid brass hexagonal lantern features scrolled metalwork and is a larger version of our standard sized Windsor lantern. Normally they are fitted with a single tier 6 light pendant fitting, however for this particular lantern the client required a greater output to light the staircase in which it would hang, so we created a more decorative 2 tier 12 light inner pendant. In addition at the bottom of the central pendant there is a low voltage capsule lamp which has been added to act as an emergency light.
Dimensions: Height 121cm – Width 52cm
A large and impressive reproduction round Georgian lantern in solid brass with distressed and burnished highlight finish featuring 12 lights.
This lantern is an exact copy of an original lantern (circa 1800) that was made for the main staircase at Culford School, Bury St. Edmonds.
Dimensions: Height 124cm – Width 74cm
A plain tapered brass lantern that has 6 internal lights. Simple decorative scrolls and crest castings. Like many of our lanterns, the metalwork can be coloured to a number of finishes.
Dimensions: Height 112cm – Width 58cm
A decorative hexagonal solid cast brass lantern with decorative scrolls, crest and ladies head castings. In a 19th century French style it features 3 lights. Like many of our lanterns, the metalwork can be coloured to a number of finishes, this example has been gilded.
Dimensions: To specification
An Indian bell lantern with turned metal finial and glass smoke dish. The bell is suspended by 3 metal chains, all metalwork finished in “dirty brass”, wired with 3 internal lamps.
Style: Bowl Light
Dimensions: Height 60cm – Width 27cm
Hexagonal brass lantern in antique bronze finish with optional glass smoke dish, wired with 3 internal candles.
Style: Metal Chandelier
Dimensions: Height 65cm – Width 30cm
A customer found a lantern in their basement that had not been unused for many years, but it needed a lot of work. A new 3-way central pendant wired with lamp holders was made, as the original had been lost, as well as manufacturing four missing leaf scrolls and one turned finial from the base. Any unbroken panes of glass were removed so that we could chemically clean the metalwork to remove all old paint, dirt and putty. Then apply two coats of red oxide paint inside and gild exterior of lantern in pure gold leaf. Replacement flat and curved glass was sourced and fitted and original glass cleaned.
Style: Lanterns
Mini solid brass circular lantern in gold lacquer finish with one internal light.
Dimensions: Height 33cm – Width 18cm
Small solid brass circular lantern in gold lacquered finish with 3 internal lights. Other sizes available and can be supplied in a number of metal finishes if desired.
Dimensions: Height 54cm – Width 26cm
Medium solid brass circular lantern in gold lacquered finish with 3 internal lights. Other sizes produced and can be supplied in a number of metal finishes if desired.
Dimensions: Height 61cm – Width 31cm
Registered Company Number: 02670892
© 2024 Wilkinson Ltd. All Rights Reserved.
We’ll never spam or share your data with a third-party.