Large Fluted Cone
Brass ceiling cone, ideal for covering unattractive electrical connections and holes in the ceiling. The steel strap can be screwed/bolted to the ceiling, once electrical connections are done, the cone can slide up flush to the finished ceiling and tighten locking screw on the collar to secure in place.
Max weight load 100kg for either shackle
Diameter 15.7cm
Depth (excluding tube & bottom loop) 7cm
Supplied in a polished but unlacquered finish that will naturally age over time.
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
All our plates are designed to be drilled and screwed into a joist or noggin so that they sit flush on the ceiling and electrical flex can be passed through the central hole.
Supplied undrilled but can be drilled with two or more holes and matching screws upon request.
Ornate ceiling plate in brass.
Max weight load 80kg
Diameter 12.7cm at widest point
Hook clearance 7mm
Supplied with 2 matching coloured or plated steel screws.
Supplied in a polished but unlacquered finish that will naturally age over time.
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Leaf Cone Ceiling Plate (Medium)
Solid cast brass ceiling plate in leaf design with loop and central hole to pass electrical cables through. Hook is attached to ‘T’ bar fixing designed to hold large weights.
Plate and hook are made of brass and ‘T’ bar fixing made of steel.
Max weight load 150kg
Diameter 17 cm at widest point
Loop diameter 2cm
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Heavy Duty Leaf Cone Ceiling Plate (Large)
Solid cast brass ceiling plate in leaf design with loop and central hole to pass electrical cables through. Hook is attached to ‘T’ bar fixing designed to hold large weights.
Plate and hook are made of brass and ‘T’ bar fixing made of steel.
Max weight load 150kg
Diameter 20 cm at widest point
Loop diameter 2cm
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Heavy Duty Brass Spinning Ceiling Plate
Solid cast brass ceiling plate and hook with central hole to pass electrical cables through. Hook is attached to ‘T’ bar fixing designed to hold large weights.
Plate and hook are made of brass and ‘T’ bar fixing made of steel.
Max weight load 150kg
Diameter 14.8cm
Hook clearance 11mm
Hook thickness (regarding the chain) 9.2mm
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Supplied is a steel hook (drilled to M10 or M12) with grub screw, spinning plate and collar with locking screw. Electrical cable passes through hole in spinning plate due to solid hook. Collar and plate are made of brass and hook made of steel. Pictured in polished brass, can be plated in a variety of finishes.
Maximum weight load 100kg
Diameter 9.6cm
Hook clearance 9.5mm
This spinning plate is to be used on ceilings where M10 or M12 steel studding has been securely fitted. Studding can be supplied on request.
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Supplied is a steel hook (drilled to M10 or M12) with grub screw, spinning plate and collar with locking screw. Electrical cable passes through hole in spinning plate due to solid hook. Collar and plate are made of brass and hook made of steel. Pictured in polished brass, can be plated in a variety of finishes.
Maximum weight load 100kg
Diameter 12.7cm
Hook clearance 9.5mm
This spinning plate is to be used on ceilings where M10 or M12 steel studding has been securely fitted. Studding can be supplied on request.
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Supplied is a steel hook (drilled to M10 or M12) with grub screw, spinning plate and collar with locking screw. Electrical cable passes through hole in spinning plate due to solid hook. Collar and plate are made of brass and hook made of steel. Pictured in polished brass, can be plated in a variety of finishes.
Maximum weight load 100kg
Diameter 15.5cm
Hook clearance 9.5mm
This spinning plate is to be used on ceilings where M10 or M12 steel studding has been securely fitted. Studding can be supplied on request.
Also available in the following finishes –
Antique Brass £108.00
Dark Bronze £108.00
Gilt (Gold Plated) £120.00
Silver Plated £120.00
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Supplied is a steel hook (drilled to M10 or M12) with grub screw, spinning plate and collar with locking screw. Electrical cable passes through hole in spinning plate due to solid hook. Collar and plate are made of brass and hook made of steel. Pictured in polished brass, can be plated in a variety of finishes.
Maximum weight load 100kg
Diameter 18cm
Hook clearance 9.5mm
This spinning plate is to be used on ceilings where M10 or M12 steel studding has been securely fitted. Studding can be supplied on request.#
Available in other finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
Chrome or Nickel available on request.
For large order amounts please email us.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
*Colour may vary slightly from image shown.
Large solid cast brass ceiling plate in a flower formation with 12 petals. Designed for use with a larger ceiling plate (central plate area 13.5cm).
2 available
Diameter 50cm
Depth 3cm
Weight 7.5kg
Ref CS 1949
Osler & Faraday reproduction 2 branch brass wall light based on model no. O.F.6201.
Supplied in any finish and wired with either French candles as illustrated or lamp holders with card candle tubes.
1 available. More available on request.
2 branch ribbon and flame brass wall lights with flambeau shades and decorative castings.
Each glass shade contains an internal lamp holder.
Projection 23cm.
Price listed is for the pair.
We’ll never spam or share your data with a third-party.
Please note that our office will be closed from 2:30PM on Tuesday 18th June until 9:00AM on Wednesday 19th June.