SES E14 black plastic lamp holder with metal leg. Ideal for using to wire lighting such as chandeliers and wall lights.
Available in three heights, the 65 mm, 85 mm & 100 mm (overall height of each lamp holder).
Perfect for slotting candle tubes over. Compatible with our card candle tubes.
The width of the lamp holder is 23.5mm
10 mm thread base with lock screw.
Lamp Holders are sent in component parts and must be assembled for use.
For bulk or international orders please contact us.
2 branch Marie Therese style wall lights. Dresses with glass buttons , bombs and rosettes.
Satin gold metal work and wired with small bayonet lamp holders with glass candle tubes.
4 available. Match 8 light chandelier ref CS 2099.
The metallic braided 3 core 0.75mm flex is a stylish and practical cable for indoor lighting. Its over-braided metallic finish gives a classic, vintage look. It is perfect for chandeliers, pendant lights, lamps, and other visible wiring projects.
This metallic braided 3 core 0.75mm flex is designed to combine style with safety. Each of the three copper cores measures 0.75 mm², providing reliable electrical performance. The cable handles up to 1000 W at 240 V. With an overall diameter of 6–7 mm, it is flexible enough to bend around lamp stems, hooks, or fittings, yet strong enough for everyday use.
-All flex will be sent as a continuous length
For bulk or international orders please contact us.
The 3 core textile braided flex wire is a decorative and reliable cable for indoor lighting. Its fabric-braided outer layer gives it a classic, vintage look. This makes it ideal for chandeliers, pendant lights, table lamps, and other fittings where the cable is visible.
This 3 core textile braided flex wire combines style with functionality. The three copper cores provide safe, consistent electrical performance. The flexible braided jacket allows you to route it easily through lamp stems, ceiling roses, or hooks. It comes in continuous lengths, so you can cut it to the exact size you need for a neat, tidy installation.
Conforms with British Wiring Standards.
“Size” is the cross section measurement of the copper wire enclosed by the casing NOT the overall diameter of the cable/flex.
The maximum load is 500 Watts @ 240 Volts and the maximum current is 3 Amps
Outside diameter of flex is 4-5 mm.
The maximum load is 1000 Watts @ 240 Volts and the maximum current is 6 Amps
Outside diameter of flex is 5-6 mm.
All flex will be sent as a continuous length. Sold as 1 metre minimum length.
For bulk or international orders please contact us.
SES / E14 plain lamp holder with 10 mm thread.
Available in brass or nickel plate. They come in three parts, the top and bottom shells of the lamp holder plus the inner.
The earth terminal is located inside the lamp holder.
M10 x 1mm pitch steel brass plated E14 Lampholder
Diameter: 28mm
Max Height: 53mm
Certified to BSEN 60238:2018+A11:2021
For large order amounts please email us.
BC (bayonet cap) B22 safer switch lamp holder with shade ring.
1/2″ x 26 TPI female threaded entry
Safety switched interior (red pin) with Pushfit Terminals
Max Height 61mm
Max Diameter 32mm
Certified to BS EN 61184:2017
For large order amounts please email us.
SBC (small bayonet cap) B15 lamp holder with shade ring.
M10 x 1mm pitch female threaded entry
Max Height 38.7mm
Max Diameter 23.2mm
Certified to BS EN 61184:2017
For large order amounts please email us.
SBC (small bayonet cap) B15 plain brass lamp holder.
M10 x 1mm pitch female threaded entry
No shade ring (plain)
Max Height 38.7mm
Max Diameter 23.2mm
Certified to BS EN 61184:2017
For large order amounts please email us.
BC (bayonet cap) B22 safer switch lamp holder with shade ring.
M10 x 1mm pitch female threaded entry.
Safety switched interior (red pin)
Max Height 61mm
Max Diameter 32mm
Certified to BS EN 61184:2017
For large order amounts please email us.
BC (bayonet cap) / B22 brass lamp holder with shade ring and earth.
Available in a choice of finishes.
1/2″ x 26 TPI female thread entry.
Max Height 44.7mm
Max Diameter 32mm
Certified to BS EN 61184:2017
For large order amounts please email us.
BC (bayonet cap) / B22 brass lamp holder with shade ring and earth.
Available in a choice of finishes.
M10 x 1mm pitch female threaded entry.
Max Height 44.7mm
Max Diamter 32mm
Certified to BS EN 61184:2017
For large order amounts please email us.
A pair of George II cut glass candelabra in the style of Christopher Hadey, each with two notch cut candle arms, slip over grease pans, two snake arms, a central triangular spike topped with a small canopy and a star cut finial. In good condition but with various repairs and replacements.
We’ll never spam or share your data with a third-party.
Please note that our office will be closed from 2:30PM on Tuesday 18th June until 9:00AM on Wednesday 19th June.