High quality brass pins used to link crystal glass drops together to make swags (strands) of dressings for chandeliers.
Available in brass and nickel plated finish.
They are strong and flexible which is ideal for linking drops together.
100g bags – approximately 400 pins.
Thickness- 0.8 mm
Pin head size – 2 mm
Length – 30 mm and 45 mm
*Please note all measurements are approximate.
For bulk or international orders please contact us and we will be happy to give you a quotation.
High quality brass pins used to link crystal glass drops together to make swags (strands) of dressings for chandeliers.
Available in brass and nickel plated finish.
They are strong and flexible which is ideal for linking drops together.
100g bags – approximately 380 pins.
Thickness- 1 mm
Pin head size – 3 mm
Length – 30 mm and 40 mm
*Please note all measurements are approximate.
For bulk or international orders please contact us and we will be happy to give you a quotation.
This listing is for a pack of 10 brass hexagonal nuts.
Available in two sizes 10 mm and 1/2″.
The 10 mm size is compatible with the listing for 10 mm brass all thread.
For bulk or international orders please contact us and we will be happy to give you a quotation.
This listing is for ONE 10 mm x 75 mm all thread brass tubing.
You can screw this all thread into the bottom of 10 mm lamp holders to join the lamp holder to your existing light fitting.
The height of this is 75 mm
Standard size M10 x 1 mm pitch
The thread of the tube is 10 mm so these all thread tubes will only fit onto a 10 mm lamp holder not 1/2”.
For bulk or international orders please contact us and we will be happy to give you a quotation.
These fine quality 2 core clear flex can be used for the wiring of glass and metal chandelier arms to the lamp holder where space is strictly limited and cable is subject to heat.
Clear 2 core double insulated flex 0.96mm– Has two tinned copper wires (silver in colour) for positive and negative. Constructed of stranded tinned copper wires to BS6360 class 2. The flex is FEP insulated ideal for use where prolonged heat or cold resistance is required ,FEP offers excellent cut through resistance when being worked.
Wire diameter width- Approx 4mm
Diameter height- 2mm
Wire is European-0.75mm
Clear 2 core flex 0.35mm- This clear figure of eight, 2 core flex has two 0.34mm tinned copper wires, both are silver in colour. Very flexible and ideal for wiring fittings with narrow curves and bends. This flex is nearly transparent
Max wattage for this flex is 100 watts.
Wire diameter width-4mm
Diameter height-2mm
Clear/copper 2 core flex 0.22mm- This clear 2 core flex has two 0.22mm tinned copper wires, both have a clear outer layer, with one side silver and one side copper. Very flexible and ideal for wiring fittings with narrow curves and bends.
Max wattage is 100 watts
Wire diameter width- 4mm
Diameter height- 2mm
All flex will be sent as a continuous length. If you require 3 metres, add quantity of 3.
For bulk or international orders please contact us and we will be happy to give you a quotation.
This is a fine quality 3 core PVC flex in 0.75mm. It can be used on chandeliers, lanterns, floor lamps, candelabras and many more light fittings.
Conforms with British Wiring Standards.
Available colours Gold, Silver, Black and Clear.
0.75mm is the cross section measurement of the copper wire enclosed by the casing NOT the overall diameter of the cable/flex.The maximum load is 1000 Watts @ 240 Volts and the maximum current is 6 Amps
*Please note with the clear 0.75mm, only the earth is indicated inside the flex. The live and neutral are unmarked so a continuity tester will be needed for wiring up ses & es fittings to determine which is which when wiring.
Outside diameter of flex is 5-7mm.
All flex will be sent as a continuous length. For example, if you would like 3 metres select quantity 3 when ordering.
For bulk or international orders please send us a message and we will be happy to give you a quotation.
Used in the wiring or restoration of chandeliers , wall lights and candelabra.
A brass metal spinning used to hold and support a wax candle or electric French candle.
The long size has a pre-drilled hole in the pot to use with electrical elements.
Measurements
Height:57 mm
Width(widest point):48 mm
Pot Circumference:25 mm
Internal Pot Size:23 mm
*Please note sizes are approximate and can vary slightly due to manufacturing.
Compatible with our French Candles.
Also available in other colour finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
For large order amounts please email enquiries@wilkinson-ltd.com.
*Colour may vary slightly from image shown.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
Used in the wiring or restoration of chandeliers , wall lights and candelabra.
A brass metal spinning used to hold and support a wax candle or electric French candle.
The short size has a closed inside pot but can be drilled open on request if needed to use with electrical elements.
Measurements
Height:26 mm
Width(widest point):50 mm
Pot Circumference:24 mm
Internal Pot Size:23 mm
*Please note sizes are approximate and can vary slightly due to manufacturing.
Compatible with our French Candles.
Also available in other colour finishes.
Antique Brass | Dark Bronze
Gilt | Silver Plated
For large order amounts please email enquiries@wilkinson-ltd.com.
*Colour may vary slightly from image shown.
*Please allow up to 3 weeks process time for delivery on colour finishes other than polished brass.
Moulded glass reeded skittle stem piece.
This can be used to replace a broken piece on a chandelier or light fitting.
Height: Approximately 12.5cm
Internal diameter of top hole: 2.2cm
Internal diameter of bottom hole: 2.2cm
External diameter of both holes: 3.6cm
For bulk or international orders please contact us.
Moulded glass reeded ball stem piece.
This can be used to replace a broken piece on a chandelier or light fitting.
Height: Approximately 5.5cm
Internal diameter of top hole: 2.2cm
Internal diameter of bottom hole: 2.4cm
External diameter of both holes: 3.6cm
For bulk or international orders please contact us.
Ideal for wiring of floor lamps.
Inline foot switch suitable for 2 or 3 core flex, 2 amp switch, max 460 watts.
Available in three colours –
Black / White / Gold
For bulk or international orders please send contact us.
Ideal for wiring of table lamps that require a hand switch.
Inline switch suitable for 2 or 3 core flex, 2 amp switch, max 460 watts
Three different colours to choose from –
White / Black / Gold
For bulk or international orders please contact us.
We’ll never spam or share your data with a third-party.
Please note that our office will be closed from 2:30PM on Tuesday 18th June until 9:00AM on Wednesday 19th June.